ROOT SONY XPERIA Z UlTRA C6802 FW 14.1.B.0.475

First download the necessary software

1. / FlashTool-0.9.11.0
2. / Downloaded C6802_14.1.B.0.475_GENERIC Hong Kong.ftf
3. / Platform-tools_r16-windows (extract to C drive)
4. / System.img (copied to the C drive)

* All files you will have to use google *

* Requirements: Machine was unlocked bootloader

Begin.

Guide root when the machine was running FW14.1.B.0.475

1. / FlashTool-0.9.11.0-install windows

2. / Copy Firmware C6802_14.1.B.0.475_GENERIC Hong Kong.ftf in C: \ FlashTool \ firmwares.

3. / Built-in USB debugging in the Developer option

4. / Shutdown press and hold the volume up button usb plug that lights green when it let go.

5. / Extract the platform-tools_r16-windows, that to the best of your C: drive for easy.

6. / Open cmd.exe (cd \ to return to the root) execute the command CD C: \ platform-tools.

7. / From the DOS prompt, type the command fastboot.exe flash system C: \ system.img you wait a few minutes, when finished it will go back to C: \ platform-tools> you continue typing fastboot. exe then most continue the power button you can see the red charging light off and unplug USB after powering up does not do anything for you always shutdown.

8. / Open Flashtool.exe, click on the lightning bolt just choose flashmode tick the box in section 3 of Section Exclude Wipe off otherwise marked will not be marked.
Then click Flash a few seconds will have instructions (hold volume down shutdown usb cord to see it run FlashTool then let go).

when finished unplug power. OK!

On Google Play, open SuperSU SuperSU to install, upgrade binary file.